Positive Crankcase Ventilation (PCV) Reroute 03-08 Ram 5.7 Hemi
Positive Crankcase Ventilation (PCV) Reroute 03-08 Ram 5.7 Hemi
Couldn't load pickup availability
This PCV Reroute is designed to work with all 5.7 Hemi Ram Trucks (03-08) with the factory intake manifold. It allows you to properly route an oil catch can system.
The original design of the the PCV valve and system on the intake manifold is self contained, meaning that without rerouting the crankcase ventilation system with this part you cannot properly setup your oil catch can.
Made in the USA using a High Quality 3D Print Process. They are made to order so lead times will vary. (Usually 1-2 weeks before shipping) Once shipped you will receive tracking information.
Watch the video below to learn more.
Instructions
Instructions
T- TOP Designates the port that connects to the intake manifold.
B- BOTTOM Designates the port that connects to the crankcase.
DON'T FORGET - Your PCV Reroute does not come with O-rings. You will need to swap them over from your factory PCV valve.
Lubricate Ports and O-rings with engine oil.
It is recomended to route the oil catch can system on most applications as follows:
B Port > Oil Catch Can (Inlet Port)
Oil Catch Can (Outlet/Vacuum Port) > Inline aftermarket PCV Valve (Note which way your valve flows) > T Port
Inline PCV Valve Required (Check Below)
Do NOT install by twisting on the ports.
DO install by twisting gently at the bridge located at the base of the two ports. This portion is intended to be used for installation.
Materials
Materials
Inline PCV Valves
Inline PCV Valves
Installation Video
